Resolution - 2003 - 04 - Establishement Of Mechanical Permits - 02/18/2003
ORIGINAL
RESOULTION No. 03-04
A RESOLUTION ADOPTING A FEE SCHEDULE PURSUANT TO SECTION 7-1B-3
OF THE EAGLE CITY CODE, TO PROVIDE FOR THE ESTABLISHIMENT BY
RESOLUTION OF FEES FOR MECHANICAL PERMITS REFERENCED IN
SECTION 106.5.2 OF THE INTERNATIONAL MECHANICAL CODE; AND
PROVIDING FOR EFFECTIVE DATE.
WHEREAS, public notice for a public hearing for these fees has been published in the
Valley News as required by Idaho Code;
WHEAREAS, the City Council has approved amending and updating the City's fee
schedule for mechanical permits by this resolution;
NOW THEREFORE, BE IT RESOLVED BY THE MAYOR AND CITY COUNCIL OF
THE CITY OF EAGLE, IDAHO:
Section 1: that said schedule attached hereto as Exhibit A and incorporated herein by this
reference, is hereby approved;
Section 2: that the Mayor and City Council are hereby authorized to execute said
schedule for and on behalf of the City of Eagle;
Section 3: that this Resolution shall be in full force and effect immediately upon its
adoption and approval.
ADOPTED by the Eagle City Council, Eagle Idaho.
This 18th day of Februarv, 2003
APPROVED:
~~.
ST A BASTI N
COUNCIL PRESIDENT
ATTEST:
...........,..
.,- .....
",. ~ OF B-40......
I~~<~ -,
v ~'OR.-t)>~ \
,.9 ~J.-
. "" *-
: * ...... 5
- ... .
\ ~ SEAL$ 0 I
il! "(\0 .A~ . ..
'f}>~ ..fI'OR1'>'\... ~"
"~.,~ ....... 'Q ~ ....
"#.#. l'E OF): ",....
.............,,'
K:\COUNCIL\ResoIutions\2003\Resolution No 03-04.doc
Exhibit A
Mechanical Permit Fees
Permit Issuance
I. For the issuance of each permit........................ ...... '" ...... ... '" ............... .................. ... ...... $ 24.00
2. For issuing each supplemental permit for which the original permit has not expired or been cancelled or
finaled... .................. ... ...... '" ...... ... ...... ... ....................................... ...... ... .................... ..8.00
Unit Fee Schedule
Note: the following do not include permit-issuing fees.
1. Furnaces
For the installation or relocation of each forced-air or gravity-type furnace or burner, including
ducts and vents attached to such appliance, up to and including 100,000 BtuIh (29.3 kW).................. ..15.00
For the installation or relocation of each forced-air or gravity-type furnace or burner, including
ducts and vents attached to such appliance over 100,000 BtuIh (29.3 kW)...................................... .19.00
For the installation or relocation of each floor furnace, including vent........................................ ....15.00
For the installation or relocation of each suspended heater, recessed wall heater or
floor mounted unit heater............................................................................................. ...15.00
2. Appliance Vents
For the installation, relocation or replacement of each appliance vent installed and not included
in an appliance permit................................................ ... ... ...... ... ...... ... ......................... .. ...8.00
3. Repairs or Additions
For the repair of, alteration of, or addition to each heating appliance, refrigeration unit,
cooling unit, absorption unit, or each heating, cooling, absorption, or evaporative cooling system,
including installation of controls regulated by this code... ... ... ... ... ... ... ... .. .... ... ...... ... . .. . .. ..... ....... ..14.00
4. Boilers, Compressors and Absorption Systems
For the installation or relocation of each boiler or compressor to and including three (3) horsepower,
or each absorption system to and including 100,000 BtuIh (29.3 kW).......................... ............ ...... ..15.00
For the installation or relocation of each boiler or compressor over three (3) horsepower (2.24 kW)
to and including 15 horsepower (11.19 kW), or each absorption system over
100,000 Btu/h (29.3 kW) and including 500,000 BtuIh (146.48 kW)................................... .......... ..28.00
For the installation or relocation of each boiler or compressor over 15 horsepower (11.19 kW)
to and including thirty (30) horsepower (22.37 kW), or each absorption system over 500,000 BtuIh
(146.48 kW) to and including 1,000,000 Btu/h (29.3 kW)...... ............ ............ ...... .................... ...38.00
For the installation or relocation of each boiler or compressor over thirty (30) horsepower (22.37 kW)
to and including fifty (50) horsepower (37.3 kW), or for each absorption system over 1,000,000 Btu/h
(292.95 kW) to and including 1,750,000 Btu/h (512.66 kW)........................ ... ...... ... .......... ........ ..56.00
For the installation or relocation of each boiler or compressor over fifty (50) horsepower (37.3 kW),
or each absorption system over 1,750,000 Btu/h (512.66 k W).. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 93.00
5. Air Handlers
For each air-handling unit to and including 10,000 din (4.72 m'/S), including ducts attached thereto... ....11.00
Note: This fee shall not apply to an air-handling unit which is a portion of a factory-assembled appliance,
cooling unit, evaporative cooler or absorption unit for which a permit is required elsewhere in this code.
Page 1 of2
K:\COUNCILIResolutions\2003IResolution 03-04 exhibit A.doc
6. Evaporative Coolers
For each air-handling unit over 10,000 din (4.72 m' IS)......... ... ... ...... '" ...... ... ...... .................... ..19.00
For each evaporative cooler other than portable type..................................................... .......... ..11.00
7. Ventilation and Exhaust
For each ventilation fan connected to a single duct................................................................... .8.00
For each ventilation system which is not a portion of any heating or air conditioning system
authorized by a permit.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. .. .. . .. . .. .. .. .. . .. . .. .. . .. . .. .. .. .. . .. . . .. .. . .. . .. . .. ..11.00
For the installation of each hood which is served by mechanical exhaust, including the ducts
for such hood... ... ... ... ... '" . ..... ... ...... ... ...... . .. ... ... ... ... ... ... ... ... '" '" .. . ... ... ...... ... ... ... ... ........ .11.00
8. Incinerators
For the installation or relocation of each domestic-type incinerator......... ......... ...... '" ......... ........... .19.00
For the installation or relocation of each commercial or industrial-type incinerator....................... .......27.00
9. Miscellaneous
For each appliance or piece of equipment regulated by this code, but not classed in other
appliance categories, or for which no other fee is listed in this table... ... '" ... ... ......... ...... ... ...... ...... ..11.00
10. Permit Fees for fuel gas piping shall be as follows:
For each gas piping system of one to five outlets.............................. ............ ...... .................... ...5.00
For each additional gas piping system, per outlet....................................... ... ...... ... ................. ..1.00
11. Process Piping:
For each hazardous process piping system (HPP) of one to four outlets...... ................................. ..5.00
For each HPP piping system of five or more outlets, per outlet...... ........................................... ..1.00
For each nonhazardous process piping system (NPP) of one to four outlets......... ...... '" ...... ......... ....5.00
For each NPP piping system of five or more outlets, per outlet..... ..................................... ...... . ..1.00
Other Inspections and Fees
I. Inspections outside of normal business hours, per hour (minimum charge - two hours).. ....... .........50.00*
2. Reinspection fees assessed - per inspection...... ... ... ... ... '" '" '" ... ... ... ... ...... '" ...... '" '" .........51.00*
3. Inspections for which no fee is specifically indicated, per hour (minimum charge - one-halfhour)....5O'OO*
4. Additional plan review required by changes, additions or revisions to plans or to plans
for which an initial review has been completed, per hour (minimum charge - one-halfhour)... ... ... .50.00*
* Or the total hourly cost to the jurisdiction, whichever is the greatest. The cost shall include supervision, overhead,
equipment, hourly wages and fringe benefits of the employees involved.
Commercial Fee Schedule
Note: the following do not include permit-issuing fees.
Under $500,000... ... ... ... ... ... '" '" '" ...... ...... ... ...... ... ...... ... ... ...... '" '" '" ....... ...Base fee _ 2.07% of job value
$500,000 to $1,000,000................................................. ....$10,350.00 plus 1.55% of job value over $500,000
Over $1,000,000......... ...... '" ...... ... ...... ... ...... ... ..............$18,112.50 plus 1.03% of job value over $1,000,000
Page 2 of2
K:\COUNCILIResolutions\2003IResolution 03-04 exhibit A.doc